07/16/2019

Building of the Scania series 2 and 3 scale models

Another Scania 112 in the painting. In this unit is being tested the sunvisor made for the low roof cab.

07/09/2019

Building of the Scania series 2 and 3 scale models

The building of the Scania models 112, 142, 113 and 143, with the variants of each model, has had a significant advance in recent days and is now in the paint stage.

07/09/2019

Mercedes-Benz 1934 asphalt tank molded tinplate scale truck

A late publication, but one that is necessary in terms of documentation and availability of different models. It is a miniature of a 1934 Mercedes-Benz truck with asphalt tank. It is a custom work and the miniature, as always, can be ordered with different configuration.

06/25/2019

Building of the Scania series 2 and 3 scale models

The Scania 2 and 3 series miniature building is already underway. Certainly, the trucks that had the most importance in road transportation in Brazil since the beginning of the 1980's. Miniatures of the T and R lines will be made.

06/25/2019

Building of the CMA-SCANIA Flecha Azul scale bus

New advances in the building of the CMA-Flecha Azul bus miniature. Now, with the parts defined, the assembly proceeds to the finishing details. For now, the miniatures are in a still raw shape, without finishes and requiring adjustments in the mounting jigs.

08/20/2018

Building of the CMA-SCANIA Flecha Azul scale bus

Except for some corrections that still have to be made in the molds, today was stamped the final structure of the front of the CMA. The darkest area, where the lights are, is not yet definitive.

08/14/2018

Military Mercedes-Benz LG 1819 6x6 tanker Scale model made of molded tinplate

Added to the Scale Models Catalog the first version of the miniature of Mercedes-Benz LG 1819 6x6. Made of molded tinplate in 1:25 scale.
Dimensions:
Length: 485mm
Width: 100mm (not counting the mirrors)
Full width: 112mm
Height: 132mm
Weight: 1,600g aprox.

08/14/2018

Site inaccessible for a few days

Problems related to bureaucracy and poor management of the information and financial systems of the server that hosts this site, made it inaccessible for a few days. The issue is specifically about the renewal of the SSL certificate, which is to keep the site safer and cleaner for the people who visit it. If you have had trouble accessing it in the last few days, our justification and sincere apologies are recorded here.

08/07/2018

Building of the CMA-SCANIA Flecha Azul scale bus

The sizing and positioning step of the lower compartments is almost over. The luggage compartments are sized, now other compartments like the battery, tank and engine will be worked. It was also done in this stage the dimensioning of the lateral structure of the roof and windows.

08/02/2018

Building of the CMA-SCANIA Flecha Azul scale bus

One more update. Unfortunately, the prototype is still without the windshields openings. I hope that in the next update the whole prototypes of the sides are done. It can be noticed that one window is lacking. With this last window one can have notion of the whole length of the bus.

07/26/2018

Building of the CMA-SCANIA Flecha Azul scale bus

The scale CMA-SCANIA bus is, now, being worked at the level of the windows. This part is not entirely detailed yet. This time the works go to the roof level and then back to the luggage compartments and other parts to be re-detailed.

07/20/2018

Building of the military Mercedes-Benz LG 1819 scale model

The sequence of the build of the Mercedes-Benz LG1819 truck miniature brings the tank version as a new option for those who enjoy collecting models of military vehicles. Another Mercedes-Benz scale truck to fuel the collection of miniatures and still allow other applications to the robust 6x6 tractor. The tank version is almost completed.

07/20/2018

Building of the CMA-SCANIA Flecha Azul scale bus

Another partial assembly was made in order to check measurements and to give notion of dimensions. It also aims to show the progress of the project to the people who made the reservation of the miniature and the people who, in some way, are accompanying the development of the miniature project of the bus. The base of the project is the CMA III and the window at the bottom of the door was added in this assembly so that it could give notion of how it would be in the versions of the CMA IV onwards.

07/11/2018

Building of the CMA-SCANIA Flecha Azul scale bus

The stamper for the standard of the lower section of the side of the CMA was developed. From this stamping will be trimmed the doors of luggage compartments and other pieces that make up the side below the level of the floor. This is the first stamping test without completing the stamper inlet and outlet guide adjustments.

06/17/2018

Building of the CMA-SCANIA Flecha Azul scale bus

The fluted aluminum on the sides of the CMA-SCANIA Blue Arrow bus are the details that most impress at first glance, but they are also a critical point of the project at the time of modeling. The alignment as well as the distance between the flutes of the sheet are not very easy to leave with a pleasant appearance.
A linear crimping machine has been developed specifically for this project. In the photo is the result of the first stamping of the top of the side still without the alignment guides on the stamper.

05/06/2018

Building of the CMA-SCANIA Flecha Azul scale bus

First images of the prototype modeling stage. The parts are in the intermediate stage of detail definition. Several changes will still be made.

05/04/2018

Scale model truck FNM D11000 Standard of molded tinplate in the 1:25 scale

Publication of the scale model truck FNM D11000 Standard of molded tinplate in the 1:25 scale

05/04/2018

Scale model truck FNM D9500 Brasinca of molded tinplate in the 1:25 scale

Publication of the scale model truck FNM D9500 Brasinca of molded tinplate in the 1:25 scale

05/04/2018

Scale model truck FNM D11000 Brasinca of molded tinplate in the 1:25 scale

Publication of the scale model truck FNM D11000 Brasinca of molded tinplate in the 1:25 scale

04/21/2018

Reactivation of the Comments page

The comments page that was unabled for a while is back now. The comments are very important to the improvement of this site. Be criticizing, praising, giving suggestion, anyway, one should feel free to comment.
The comments, which were being sent straight to the e-mail box, will be answered there again.

04/16/2018

FNM D11000 Standard tinplate scale truck

Publication of the scale model truck FNM D11000 Standard of molded tinplate in the 1:25 scale

04/16/2018

FNM D11000 METRO metal scale truck

Publication of the scale model truck FNM D11000 Metro of molded tinplate in the 1:25 scale

04/16/2018

FNM D11000 Brasinca truck and trailer tinplate scale truck

Publication of the scale model truck FNM D11000 Brasinca truck and trailer of molded tinplate in the 1:25 scale

04/13/2018

My Albuns

Creation of a section on the site to show several photos that, because they do not represent a sequence of a certain model, have not been shown until then. Also, Old Car Show Events photos will be part of these albums. However, the goal is not to limit the albums to just car-related photos.

04/13/2018

Scania Experience Magazine of Australia

The first publication of the miniatures in the Scania magazine of Australia happened in 2011.

Article with summary on the beginning with the scale models and the present samples of miniatures of truck Scania.

04/13/2018

Scania Experience Magazine of Australia

The second publication of the miniatures in the Scania magazine of Australia happened in 2016.

Article with summary on the beginning with the scale models and the current samples of Scania truck miniatures.